Speciality | Puff | FFPU1930M43

• A polyurethane based, highly flexible thermal transfer film
• Cut this material in “mirror” image; 45° blade, metallics 60° blade
• Application: Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics
• Will not adhere to: nylon, dazzle cloth, shiny polyester
• Press: Colors 255° – 275°F for 12-14 seconds with a Teflon release sheet. Vary Puff effect by increasing or decreasing temperature by 10°F within range. Metallic 275°F for 12-14 seconds with a Teflon release sheet. Metallic is 10 sec.
• Medium to firm even pressure, peel hot – remove the carrier and/or transfer sheet immediately. | *Metallic: Re-press for 4 seconds for maximum puff
• Wash inside out, cold water, tumble dry/low
  See PDF for more details

“It’s best to test!” Pre-test on an inconspicuous area before applying final production. Application instructions for moisture wicking materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment. Also, please be advised dye migration has occurred with low energy dyes in polyester & poly-blend fabrics.