Specialty Materials | ColorPrint™ | CPS21602425

• A polyurethane film for printing with solvent or eco-solvent inkjet printers. It is also latex ink compatible
  (When printing on UPSN-4035 with a latex printer, you must use TM-854 Clear Transfer Mask and never heat above 100(o) F on the printer settings.)
• Cut this material in “right way reading”
• Application: Transfers to pre-shrunk cotton, blended fabrics, uncoated polyester, Spandex, wool, linen, Lycra
• Film contains blockers to prevent dye migration (bleed) from reactive and sub-dyed fabrics
• Use transfer tape medium tack (T&S12/1220) to remove the image from the paper backing and transfer imaged material to the garment
• Press: 275(o)F for 15 – 25 seconds
• Hard even pressure, peel warm, almost hot
• Wash garment inside out, cool water, gentle cycle, tumble dry low.
  Test on Nylon, Dazzle Cloth, and Shiny Polyester. Follow wash instructions for nylon.

Instructions for application to moisture-wicking materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then rub it into the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow better adhesion to the garment.

Instructions for application to dazzle cloth and shiny polyester: We highly recommend that you TEST prior to doing large runs. Coated polyester can routinely cause adhesion issues.