Browse Categories

55UVAP3155L

AP3155 Adhesion Promoter

Cannot Ship UPS Air
Item #: 55UVAP3155L

AP3155 UV and LED Ink Adhesion Promoter

Product Info

Supply 55

  • An adhesion promoter for UV and LED curable inks
  • For use when printing on hard-to-print surfaces such as glass, metal, aluminum, acrylics, corrugated plastics, polystyrene, and HDPE
  • Shelf life: 1 yr from date of manufacture
  • For both interior and exterior applications
    Application Instructions
  • Wear protective gear including Latex/Nitrile gloves and safety glasses
  • Use in a well-ventilated area
  • Apply AP3155 to the substrate with a clean, white, lint free wipe/microfiber cloth saturated with the promoter, covering the full surface and insuring no voids
  • Using a clean, dry, white, lint free wipe/ microfiber cloth, wipe off AP3155, leaving a thin layer of promoter on the substrate (the substrate will feel slippery)
  • Load the AP3155 prepared substrate into the printer and print image using UV or LED curable ink
  • AP3155 will cure with the ink when flashed by the UV or LED lamp
    Paint Gun Application:
  • Wear protective gear including Latex/Nitrile gloves and safety glasses
  • Cut AP3155 with Acetone at a ratio of 50/50
  • Spray a thin even layer of AP3155 onto the substrate using a spray gun outfitted with a fine tip nozzle
  • Load the AP3155 prepared substrate into printer and print image using UV curable ink, AP3155 will cure with the ink when flashed by the UV lamp
    Glass Special Instructions
  • When printing on glass only print on the float or tin side of the glass
  • Shine a black light on glass substrate to determine/confirm which side is the float or tin side of the glass, it will glow.

Item Specifications

  • Supply 55
  • Ink Adhesion Promoter
UOM: LITER
Available in Grand Rapids, MI
Show All Locations
Qty

Have Questions?

Ask our experts: